Hack Playstation 3 (USB MOD/Jailbreak?)

 

Pre-requisites are as follows:

* Any (FAT or SLIM) PlayStation 3 Console running firmware 3.41 or above.
* PS Jailbreak USB Modchip (Can be easily purchased from ChipSpain or OzModChip).
* An external USB drive formatted to FAT32 with the “Backup Manager” file on it which you can download from here.
* Original disc of any PS3 game which you want to backup.

Step 1: Power off your console and make sure that there isn’t any disc in the Blu-ray drive.

For the SLIM Model: Remove the power chord before plugging in the USB.
For the FAT model: Turn off the power switch found at the backside of the console.

Step 2: Now insert the USB based PS Jailbreak Modchip to any USB port of your choice on the console. Once the USB is in place, Power ON the console and immediately press the “Eject” button. There should now be two LEDs turned-on on the USB as the console is loading.

PS-Jailbreak-LightsIf the LED light on the USB turns green, you are good to go as the PS Jailbreak has been successfully loaded.

PS-Jailbreak-GreenIf the LED turns red, then it means that the PS Jailbreak Modchip didn’t load successfully. This usually happens when the Power and Eject button sequence wasn’t performed properly. Start from Step 1 again if you end up having the red light.

PS-Jailbreak-Red

Step 3: Once the console has finished booting up with the PS Jailbreak Modchip, plug-in the external USB storage device which has the “Backup Manager” setup to the console’s USB port.

Step 4: Now navigate to the “Game Menu” and select the option “Install Package Files” and then select “manager.pkg” file. This will basically install the “Backup Manager” application that you download earlier to your hard drive.

Game-Menu-PS-Jailbreak

Step 5: When the “manager.pkg” file is done loading, scroll all the way down in the “Game Menu” and there you should see a new application called “Backup Manager”, run it.

Back-Up-Manager

Step 6: Now we’re in the Backup Manager app. Insert the game in the console’s optical drive which you want to backup. Press “O” and you will be asked where to make the backup, on the internal HDD or the external storage source connected via USB. This process is further elaborated by the following screenshots.

Game-Back-Up

PS-Jailbreak-Back-Up

Step 7: In order to play a game via the backup you just made, insert any original game disc into your console (To emulate the loading process), run “Backup Manager” in the “Game Menu”. Press “X” to play the selected backup game.

Back-Up-Manager-Menu

Step 8: Now you will be taken back to the main menu. In the “Game Menu” you will see the game which you have backed up. Now you can select the game, and run it without having the disc in the console’s drive.

Game-Menu

Make sure that the PS Jailbreak USB Modchip is connected to your console at all the times when you are playing the games via backups. Enjoy.

 
 

Jailbreak all iOS Devices upto 4.0.1

 

Its simple, its easy its fast. Point your activated iPhone or your iPod Touche’s or iPad to http://jailbreakme.com

And follow the simple simple instructions!

Supports:

iPhone 4
iPhone 3GS
iPhone 3G
iPhone 2G

iPod Touch 3G
iPod Touch 2G
iPod Touch 1G

iPad (all firmwares)

Enjoy!

 
 

New (iOS 4+) Jailbreak and Unlock for iPhone 4 and All Other iDevices Nearly Ready

 

Comex said in a interview not too long ago that he has nearly finnished his new spirit like userland jailbreak but is waiting for saurik:

“You will have to ask Saurik if he’s done with that bootstrap yet. Like I hate to say this because people will be complaining, but it is pretty close to done.”

It seems like that is now done:


saurik got bootstrap!

Expect a new 4.0/4.0.1/4.1 all iDevice Jailbreak from comex soon! p.s watcht the interview by clicking here.

 
 

Jailbreak 3.1.3 3GS 3.2 iPad new bootrom and all other iDevices Untethered with Spirit Jailbreak

 

You can now jailbreak all your iDevices with Spirit untethered. Its as easy as clicking the “jailbreak button”!

What’s Spirit?

Spirit is an untethered jailbreak for iPad, iPhone, and iPod touch on the latest firmwares. If you currently are using a tethered jailbreak, you have to restore to use Spirit. Do not upgrade if you use an unlock on an iPhone 3G or 3GS. (You can, however, restore to 3.1.2 if you have SHSH blobs for that version.)

NOTE: Spirit is not a carrier unlock.

Requirements

* Any iPad, iPhone, or iPod touch on firmware 3.1.2, 3.1.3, or 3.2.
* An activated device: one not stuck on the Connect to iTunes or Emergency Call screen.
* Any version of iTunes 9 (including 9.1.1).
* Syncing with iTunes before trying this highly recommended.

Download:

Spirit Jailbreak for WINDOWS

or

Spirit Jailbreak for MAC

——–
UPDATE:

Troubleshooting: If you’re getting error code c0000005, apparently setting compatibility mode to Windows 98 allows Spirit to work.

 
 

Jailbreak iPhone 4.0 with redsn0w

 

The iPhone Dev-Team is back! They have just released a test version of redsn0w 0.9.5 (Mac only for now) to jailbreak the latest iPhone OS 4 Beta. This release is targeted towards developers only to help them upgrade their existing app on Cydia for this upcoming latest firmware.
Continue reading “Jailbreak iPhone 4.0 with redsn0w”

 
 

Jailbreak iPhone 3GS

 

To jailbreak your iPhone 3GS you will require sn0wbreeze or redsn0w. This is for old bootrom models only. To unlock new bootrom iPhones you will have to wait for the spirit/geohot/GreenPois0n to release their software based jailbreak method.

jailbreak

For Windows:

Download redsn0w 0.9.4 for Windows
Download sn0wbreeze for windows

For MAC:

Download redsn0w 0.9.4 for Mac